Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Basic safety notes
2.2 Reasonably foreseeable misuse
2.3 Constructional changes
44
2 Basic safety notes
2.1 Intended use
The product is designed exclusively to transmit rotating
movements or forces by means of a directly driven drive module.
The integrated rotary feed-through serves exclusively to transmit
pneumatic and electric energy.
The product may only be used within the scope of its specified
l
technical data, dimensions, prescribed dimension drawings
and operating conditions. The specified tightening torque
must be adhered to.
The product is intended for installation in a machine/
l
automated system. The applicable guidelines for the machine/
automated system must be observed and complied with.
The product is intended for industrial and industry-oriented use.
l
Appropriate use of the product includes compliance with all
l
instructions in this manual.
Operating modes with low speeds of rotation, reverse
l
operation and mechanical vibrations may reduce the
product's service life.
The product may only be operated within its service life and
l
used for safety applications. After this period, the bearings
may fail due to wear and fatigue. After its service life has
been reached, the product must therefore be taken out of
operation.
Avoid passage of current through the ball bearings (e.g. by
l
coupled currents).
Used to transport persons or animals
l
Motor is not suitable for direct mains connection
l
Not suitable for use under water
l
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of
the product or damage it.
Structural changes should only be made with the written
l
approval of SCHUNK.
10.00 | ERD | Assembly and operating manual | de en | GAS 315325
Werbung
