Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly
5.4 Electrical connection
58
DANGER
Danger from voltage!
Touching live parts can be deadly.
Switch off the power supply before any assembly, adjustment
l
or maintenance work and secure against being switched back
on again.
Only qualified electricians my carry out electrical installation
l
work.
Disconnect the converters from the power supply.
l
The intermediate circuit capacitors must be discharged.
l
Note the correct sequence for connecting cables (first the
l
grounding cable, then conductors).
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
Before starting any work on the product: Switch off the power
l
supply and secure against restarting.
Make sure, that no residual energy remains in the system.
l
CAUTION
Material damage possible to lines!
If the following prerequisites are not observed for installation of
lines, the lines may be damaged.
When installing the lines, observe the specifications in the
l
line manufacturer data sheet.
During operation of the axes across the full stroke too, make
l
sure that the lines do not become crushed, sheared or torn
off.
Install the power cable and measuring system lines in
l
separate cable tracks.
10.00 | ERD | Assembly and operating manual | de en | GAS 315325
Werbung
