Olympus DM-720 Bedienungsanleitung Seite 5

5 Charging has finished when the
battery indicator changes to [
NOTE:
• Never attempt to charge an
alkaline battery, lithium battery
or other primary cell battery. Fluid
leakage or overheating may cause
the recorder to malfunction.
Turning the power OFF
1 Slide the POWER/HOLD switch
in the direction of the arrow for at
least half a second.
Power Save mode
When the voice recorder has been
stopped for at least 10 minutes after
power ON, the display disappears
and the voice recorder automatically
enters the Power Save mode.
• Pressing any button releases the
Power Save mode.
Selecting the mode (Fig. 6)
1 While the voice recorder is in stop
mode, press the F1 (HOME) button
to display the [Home] screen.
2 Press the 9 or 0 button to
select the desired mode.
3 Press the `OK button.
When [Recorder] is selected:
The voice recorder enters [Recorder]
mode. Audio can be recorded with
the built-in microphone.
Files recorded with the built-in
microphone can also be played back.
When [Music] is selected:
The voice recorder enters [Music]
mode. In this mode you can play
music files transferred to the voice
recorder.
When [Calendar Search] is selected:
The voice recorder enters [Calendar
Search] mode. In this mode you can
search for files by specifying the
recording date.
Recording
].
Basic recording procedure (Fig. 7)
1 Press the 9 or 0 button
in the [Home] screen and select
[Recorder].
2 Press the `OK button.
3 Press the + or – button to select
the folder to save the recording in.
4 Point the built-in microphone
in the direction of the sound to
record.
5 Press the REC ( s) button to start
recording.
a Elapsed recording time
b Level meter (changes according
to recording volume and
recording function setting)
c Remaining possible recording
time
• The LED indicator light lights.
6 Press the STOP ( 4) button when
you want to stop recording.
d File length
Changing the recording scene
(Fig. 8)
The voice recorder has preregistered
templates of optimum settings
tailored to various recording
applications such as lectures and
dictation. When selecting one of
these templates you can enter
several settings recommended for
your recording application all in a
single operation.
1 While the voice recorder is in stop
mode, press and hold the MENU/
SCENE button.
2 Press the `OK button.
3 Press the + or – button to select
the desired recording application.
4 Press the `OK button to finalize
the setting.
5 Press the STOP ( 4) button to exit
the selection screen.
Playback
In addition to files recorded by the
voice recorder, you can also play files
in WAV and MP3 format transferred
from a PC.
Basic playback procedure (Fig. 9)
1 Select the file to play from the
folder containing it.
2 Press the `OK button to start
playback.
aFolder indicator/File name
bElapsed playback time/File
length
c Playback position bar indicator
3 Press the + or – button to adjust
the volume to the desired level.
• The volume can be adjusted to
a setting between [00] to [30].
The higher the number, the
louder the volume.
• If the volume is set too loud, a
warning screen may appear.
4 Press the STOP ( 4) button to stop
playback.
Changing the playback speed
(Fig. p)
1 Press the `OK button during
playback.
2 Press the + or – button.
• The playback speed can be
adjusted between [x0.5
Play] and [x3.5 Play] in 0.1
increments.
3 Press the `OK button to finalize
the setting.
EN
5