Basler BIP2-DXXXXc-dn Models Installationsanleitung Seite 22

Installation Guide
3 Locating the Camera on Your Network and
Making Initial Camera Access
The location procedure assumes that your camera is on the same network

subnet as your PC and that you have a Windows
your PC.
 The procedure uses a web browser to access your Basler IP Fixed Dome
Camera. The recommended web browser is Microsoft Internet Explorer
8.0 or higher.
If your network includes a proxy server and your web browser is set to use

the proxy server, the browser will not be able to access the camera. To
avoid this problem, change your web browser's connection settings so that
the proxy server will not be used with local addresses.
Make sure that Javascript is enabled on your browser.

To locate your Basler IP Camera on your network and make initial access:
1. Obtain the CD that was delivered with your camera and place it in your
computer's CD-ROM drive.
2. Copy the BIPFinder.exe program from the CD to a location on your
computer's hard drive. The BIP Finder is a standalone program and does
not need to be installed.
(You can also obtain the BIP Finder software from the Downloads section
of our website:
Create a shortcut on the desktop to the BIP Finder program.
20
www.basler-ipcam.com
®
operating system on
)
Basler IP Fixed Dome Cameras
AW00101404000