Toro Tempus Pro Controller 4 Bedienungsanleitung Seite 10

Tempus Pro Controller 4-8-12-16
Factory Settings
The Control Module can be restored to its factory settings in the following way:
1. Press and keep pressed the + and – buttons.
2. Press and release the Reset button (see Control Module Components n°18).
3. When the display shows FACTORY release the + and - buttons.
Important Note: a Factory Settings will erase all previous programs and settings.
10
Control Module Components
1. Control Module.
2. Programming Dial - To select irrigation functions.
Programming Dial Positions:
3. Run Time - To set station run time duration.
4. Start Time - To set start times(s) for automatic watering program.
5. Water Days - To set individual days for automatic watering.
6. Watering Budget - To set Watering Budget adjustment for run time
duration.
7. P+ and P- Buttons - Select next/previous irrigation programs.
8. Auto Button
- To select automatic operation.
9. Help Button - To show help text on LCD display.
10. Settings Button - To set Controller's parameters.
11. Test Button - To run a program to check hydraulic and electric station
operation.
12. Manual Program(s) Button
operation.
13. Manual Station(s) Button
- To select station(s) for manual operation.
14. Pause Button - Turn off and prevents automatic station operation.
15. Start/Stop Button - To start or stop manual program(s) and station(s) and
test program(s).
16. and Button - Press to increase or decrease display number values and
various functions.
17. and Button - Press to select next or previous function parameter.
18. Reset Button - Momentarily insert a clip to press the hidden Reset button to
restart operations.
19. LCD Display
- To select watering programs for manual