Neoss NeoScan 1000 Installations- Und Bedienungsanleitung Seite 8

Toolbar overview
Acquisition Step Toolbar
Scan button: Enables you to scan the upper
and lower arch, and the buccal bite
registration.
Refine button: Refines the acquired 3D model,
and enables you to use various tools to check
the refined results.
Finish button: complete the case information
and save the scan results.
Image Toolbar
Cut button: Draw a curve to delete
unnecessary data.
Lock button: Enables you to select and lock
an area on the model to prevent it from being
updated by additional scanning.
Mark tooth button: Mark one or more
preparation / implant areas.
8 NeoScan 1000 Installation and Operation Manual
Undo last cut
Return to the upper level tool (icon
on the left)
Unlock the last locked area
Return to the upper level tool (icon
on the left)
Delete marked teeth
Return to the up-level toolbar (icon
on the left)
Jaw/Bite Switch Toolbar
Upper Jaw button: Acquires a 3D model of
the upper jaw.
Lower Jaw button: Acquires a 3D image of
the lower jaw.
Buccal Bite Registration button: Acquires a
3D image of the bite.
Switch Upper/Lower Jaw button: Changes the
acquisition mode from upper to lower or vice
versa, if you accidentally scan teeth on the
wrong jaw.
Delete button: Delete all models from the
current case.
Quadrant Snapshot button: Displays a
preview of five 2D images showing different
views of the model.
Transparency button: Set the transparency of
the scanned model.
Undercut check button: View the undercut
areas on the surface of the preparation.
Occlusion analysis button: Analyze the
occlusion space.