Neoss NeoScan 1000 Installations- Und Bedienungsanleitung Seite 33

• Start the scanner and scan the part of the preparation areas that has been cut out.
• If you need to remove soft-tissue artifacts, mismatches, or unwanted views during the acquisition, click the
Cut tool, then draw a curve that covers the region to be removed on the 3D model. If necessary, rescan the
area to fill the holes.
You can click and hold the middle mouse button to rotate the 3D model
when using tools such as Cut
• When you have completed the preparation scanning, proceed to the Refining and Checking the 3D Model step.
Refining and checking the 3D model
Refining the 3D model allows you to obtain higher accuracy data for further processing. To refine the 3D model,
follow these steps:
• Click the Refine
configuration, the refining process may take several minutes.
• After the refining is complete, manipulate the refined 3D model using the following methods:
, Lock
button, the refining progress bar will be displayed. Depending on your computer
and Mark tooth .
NeoScan 1000 Installation and Operation Manual 33