Neoss NeoScan 1000 Installations- Und Bedienungsanleitung Seite 28

cut out part is not sufficient to contain the scan body, you can adjust the "Implant cut out diameter" option to
fit the scan body you choose. After the adjustment, the change will take effect the next time you open the
software.
• Start the scanner and scan the part of the scan body areas that has been cut out.
Start the scan body scanning from the surface 1-2 teeth away from the
scan body, so that the system can recognize the 3D structure.
• When you have completed the scan body scanning, proceed to the Refining and Checking the 3D Model step.
Refining and checking the 3D model
Refining the 3D model allows you to obtain higher accuracy data for further processing. To refine the 3D model,
follow these steps:
• Click the Refine
configuration, the refining process may take several minutes.
28 NeoScan 1000 Installation and Operation Manual
button, the refining progress bar will be displayed. Depending on your computer