Neoss NeoScan 1000 Installations- Und Bedienungsanleitung Seite 11

• Implant cut out diameter: Set the diameter of the automatic cut out areas in implant mode, it is recommended
to choose a value slightly larger than the diameter of the scan body used.
• Preparation cut out diameter: Set the diameter of the automatic cut out areas in preparation scan mode, it is
recommended to choose a value slightly larger than the preparation diameter.
• Bite adjustment: Set whether to adjust the bite result to avoid intersection.
• Hole highlight color: Fill the holes in the model with the specified color after refining.
• Enable remote control: When selected, the scanned 3D model can be rotated by rotating the scanner after the
scanning is stopped.
• Enable scanning sound: When selected, a sound will be continuously played when you are successfully scanning
(if your computer does not have speakers, this option will not take effect).
• Enable warning sound: When selected, a warning sound will be played if the scanning duration exceeds the
recommended thresholds, a strong light is detected, or the scanning performance is declined (if your computer
does not have speakers, this option will not take effect).
• Color scheme: Select the color scheme of the user interface.
• UI element size: Select the size of interface icons to adapt to different screen resolutions.
• Monochrome color: Select the color when displaying the 3D model in monochrome.
• Jaw/Bite switch: Select the style of jaw/bite switch.
NeoScan 1000 Installation and Operation Manual 11