Neoss NeoScan 1000 Installations- Und Bedienungsanleitung Seite 22

Refining and checking the 3D model
Refining the 3D model allows you to obtain higher accuracy data for further processing. To refine the 3D model,
follow these steps:
• Click the Refine
configuration, the refining process may take several minutes.
• After the refining is complete, manipulate the refined 3D model using the following methods:
• Click and hold on the 3D model to rotate it.
• Right-click and hold on the 3D model to move it in the window.
• Use the wheel of the mouse to zoom in or zoom out on the 3D model.
• Click the True color
• Click the Zoom fit
• Click the View orientation
• Click the Snapshot
• Click Upper Jaw
• Click the Transparency
transparency of the 3D model.
• Click Cut button to select and delete unwanted data.
• Click Intraoral Camera
• Click the Quadrant Snapshot
views of the model.
• Click the Occlusion analysis
• If you find obvious holes when checking the 3D model, click the Scan
fill the holes.
• Repeat steps 1 through 3 until you are satisfied with the 3D model.
22 NeoScan 1000 Installation and Operation Manual
button, the refining progress bar will be displayed. Depending on your computer
button to view the color or monochrome 3D model.
button to scale the model to its best view.
button to see six views of the 3D model.
button to take a snapshot of the 3D model.
button or Lower Jaw
button to display the transparency slider, click and drag the slider to adjust the
button to pick up intraoral images from the scanned data.
button to open the Quadrant Snapshot window, which displays multiple
button to analyze the occlusion space.
button to hide or display the jaws.
button and rescan the areas to