Neoss NeoScan 1000 Installations- Und Bedienungsanleitung Seite 15

Installing the wall mount holder
To use the holder as a wall mount holder, follow these steps:
Method 1
• Select an area that you can access easily.
• Insert screws through the holes in the holder bracket to affix it to a solid surface.
Method 2
• Place the base of the holder on the desktop, and fix the holder bracket on the base with screws.
• Select an area that you can access easily.
• Fix the screws to a solid surface.
• Hang the holder to the screws through the holes on the back of the holder base.
If the holder is not properly installed, there is a risk that the holder can
fall off the wall, resulting in damage to the scanner.
NeoScan 1000 Installation and Operation Manual 15