Neoss NeoScan 1000 Installations- Und Bedienungsanleitung Seite 32

• Click the Preparation button below.
• Check whether the part that the software automatically cut out from the preparation areas is sufficient to
contain the preparation. If the cut out part is not enough to contain the preparation, you can click the
Cut button, and cut off the necessary part to cover the preparation. In order to avoid the situation that
the cut out part is not sufficient to contain the preparation, you can adjust the "Preparation cut out diameter"
option to fit the preparation. After the adjustment, the change will take effect the next time you open the
software.
32 NeoScan 1000 Installation and Operation Manual