Neoss NeoScan 1000 Installations- Und Bedienungsanleitung Seite 6

Status indicator overview
The relationship between the status of the scanner and the status indicator is as follows:
NeoScan 1000 holder overview
Place the scanner in the holder when you are not using it.
The scanner goes into sleep mode when put into the holder or left idle for
10 seconds. To use it again, take it out of the holder or pick it up and press
any button on the scanner.
The scanner will automatically shut down if it is idle for more than 10
minutes. If you need to use it again, press any button on the scanner, or
take it out of the holder.
NeoScan 1000 packing list
Scanner handpiece
Reusable tip
Holder set
Screw pack for holder
NeoScan 1000 user manual: Installation and operation
NeoScan 1000 user manual: Safety, regulatory and
technical specifications
6 NeoScan 1000 Installation and Operation Manual
Scanner Status
Power off
Connected
Startup
Sleep
Part
Status Indicator
Off
Solid blue
Flashing
Breathing light
Quantity
1
4
1
1
1
1