Silvercrest SGBR 1500 D4 Bedienungsanleitung Seite 71

Using the baking tray/rack
WARNING! RISK OF INJURY!
► Always use the tongs 0 to insert the hot
baking tray q/the hot rack e into the appli-
ance or to remove it .
■ Push the baking tray q/the rack e into one of
the 3 rails in the cooking chamber of the appliance .
ATTENTION! DAMAGE TO PROPERTY!
► Never place the baking tray q/the rack e
directly onto the heating elements 8 .
■ To remove the hot baking tray q or the rack e,
hook the tongs 0 onto them as follows:
Fig . 4: Hooking the tongs 0 onto the rack e
Fig . 5: Hooking the tongs 0 onto the baking
tray q
■ 68 │ GB │ MT
Before first use
1) Insert the plug into a mains power socket .
2) Turn the temperature control 2 clockwise to
the maximum temperature (to the stop) .
3) Turn the function switch 3 to "upper and
lower heat" .
4) Open the glass door 6 leave this open for this
operation .
5) Remove any installed accessories from the
cooking chamber .
6) Turn the timer 4 to 20 minutes .
NOTE
► The first time the appliance heats up, a
small amount of smoke and odour may be
generated due to production-related residue .
This is normal and is completely harmless .
Provide sufficient ventilation by opening a
window, for example .
The appliance switches off automatically
after 20 minutes .
If you want to interrupt the heating process
prematurely, turn the temperature control 2
counter-clockwise to the stop and set the
timer 4 to "OFF" .
7) Allow the appliance to cool down, then clean
the appliance as described in the chapter
"Cleaning and care" .
The appliance is now ready for use .
SGBR 1500 D4