About These Instructions; Document Number; Validity; Target Group - Truma Combi D Einbauanleitung

Combi D
1

About these instructions

These instructions are part of the product.
Always carry the operating instructions in the
vehicle.
Also make the safety instructions available to other
users.
1.1

Document number

The document number of these instructions can be
found in the footer on every page and on the back
page.
The document number consists of
Part number (10 digits)
•
Revision status (2 digits)
•
Publication date (month / year)
•
1.2

Validity

These instructions are for Combi D 4, Combi D 6,
Combi D 4 E, Combi D 6 E, referred to as Combi D
below.
1.3

Target group

These instructions are intended for experts.
Only competent, trained personnel (experts) may install
and repair the Truma product and carry out the function
check with consideration of the installation and oper-
ating instructions and the current recognised rules of
engineering. Experts are persons who, based on their
professional training, their knowledge of and experience
with Truma products and the relevant standards, are
able to carry out the required work properly and recog-
nise potential hazards.
 For the sake of simplicity, in the following, no dis-
tinction is made between genders. Gender equality
is intended in the way terms are used.
1.4

Supporting documents

Further information about this appliance, such as its
purpose, safety instructions, product description, opera-
tion, technical specifications or guarantee can be found
in the associated operating instructions.
34020-01190 - 01 - 03/2022
1.5 Symbols and means of
representation
Symbol Meaning
Warning about dangers to persons
Expert
Additional information to provide a bet-
ter understanding or to optimise work
processes.
Symbol for an action.
Something must be done here. In case
of several measures, observe the correct
sequence.
*
Optional parts
Reference to a picture
(Fig. 3-1)
e.g. Figure 3 – number 1
1.6

Warnings

These instructions contain warnings about potential in-
juries and/or material damage.
Always read and observe warnings.
Observe all measures that are marked with the
warning symbol and signal word.
Warning word Meaning
Danger for persons.
DANGER
If these instructions are ignored, it
will result in death or serious injury.
Danger for persons.
If these instructions are ignored,
WARNING
it may result in death or serious
injury.
Danger for persons.
CAUTION
If these instructions are ignored, it
may result in minor injury
Information to prevent material
NOTICE
damage
1.7

Safety instructions for experts

Below are some additional safety instructions to draw
experts' attention to particular dangers associated with
installing and repairing Truma products.
Read and observe the following information to pro-
tect yourself and your surroundings.
Installation, dismantling and repair work must comply
with the local conditions and regulations and the recog-
nised rules of engineering.
Observe statutory accident prevention regulations.
Observe regulations for personal protective
equipment.
Observe statutory environmental protection
regulations.
If applicable, observe regulations for occupational
insurance schemes.
About these instructions
EN 25