Topping Up The Regeneration Salt; Replacing The Canister - Miele PTD 901 Betriebsanleitung

| |
English 8 Cleaning and maintenance
8.3

Topping up the regeneration salt

Note
Damage to the water softener
Chemicals such as detergent or rinse aid and other salts such as table salt or thawing salt will inevitably damage the
water softener.
Ø
Fill only with regeneration salt or a pure evaporated salt with a maximum grain size of 1-4 mm.
Ø
Only fill with water when commissioning the water softener for the first time.
Ø
Top up the regeneration salt.
Ø
Note: Danger of rust formation in the filling area as a result of salt residues! After filling the regeneration salt, start a washing
programme or the self-cleaning programme in order to wash away any salt residues that may be present. We recommend starting
the self-cleaning programme, as salt residues can have a negative impact on the wash result.
8.4

Replacing the canister

Warning
Risk of chemical burns when handling chemicals
Ø
Observe the danger and safety notes on the canister and safety data sheet.
Ø
Wear protective clothing, protective gloves and protective goggles.
A suction tube is needed to suck out the chemicals from the canisters.
– Do not place the suction tube for the rinse aid in the canister with detergent or vice versa.
– Only use the suction tube with sufficiently stable canisters. Narrow and tall canisters can tip as soon as the suction tube is pulled.
– Do not pull on the dosing hose or main power cable, as this may lead to a defect.
Ø
Wear protective clothing, protective gloves and protective goggles.
Ø
Pull the suction tube carefully out of the empty canister.
Ø
Check whether both vent holes (1) in the cover cap are open. Clean if required.
Ø
Place suction tube in the new canister.
Ø
Slide the cover cap slowly downwards until the canister opening is closed.
1
1
Ø
Prime the dosing device.
Priming the dosing devices
The dosing device must be primed if air has entered the dosing hose. This occurs if the canister is not replaced in time.
Item Description
1 Rinse aid dosing device
2 Detergent dosing device
Ø
Press button 1 or 2.
ð The button turns white.
ð The dosing device is primed.
Ø
As soon as the button goes off again, exit the menu.
80
~ 1,5 l
~ 1,5 kg
1
|
12020321/01; 2023-07
2
|
Operating instructions