Herunterladen Inhalt Inhalt Diese Seite drucken

Establish The Electrical Connection Of The External Dosing Devices - Miele PTD 901 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für PTD 901:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
5.6

Establish the electrical connection of the external dosing devices

Danger
Electric shock from live components
A fatal electric shock can occur during installation and maintenance work and when carrying out repairs.
Ø
Isolate and lockout the mains supply to the warewasher.
Ø
Check that there is no voltage present.
Item
Name
1
DETERGENT
2
WASH
3
RINSE
4
N
5
L1
Depending on the configuration of the transfer strip, voltage is present at the RINSE and DETERGENT terminals.
Terminal
Voltage present
DETERGENT
While machine fills
Parallel to solenoid valve
– While machine fills
– During the rinse
WASH
Parallel to wash pump
RINSE
Parallel to rinse pump
Parallel to solenoid valve
– While machine fills
– During the rinse
Operating instructions
Note: Maximum current drain at the transfer strip: 0.5 A. Only
connect external dosing devices with their own fuse protec-
1 2
3
4
5
tion. Include the dosing device in the protective circuit (PE) of
the warewasher.
Ø
Ø
Ø
Note
For detergent dosing device (type-dependent)
For detergent dosing device (type-dependent)
For rinse aid dosing device
Neutral / phase 2
Continuous voltage / phase 1
Condition
– Hood closed
– Minimum water level
in the tank
– Hood closed
– Hood closed
– Hood closed
– Hood closed
|
12020321/01; 2023-07
Disconnect the warewasher from the electrical mains supply
and secure against unintended activation.
Connect external dosing device to transfer strip.
Configure the transfer strip (} page 68).
Restriction
– Not during the self-cleaning programme
– Not during the self-cleaning programme
– Not in the drainage programme
– Not while the machine is being filled
– Not during the descaling and basic clean-
ing programme
– Not during the self-cleaning programme
– Not in the drainage programme
– Not while the machine is being filled
– Not during the descaling and basic clean-
ing programme
– Not during the self-cleaning programme
– Not in the drainage programme
|
|
|
Commissioning
5
English
67

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ptd 901 liftPtd 901 ecoPtd 901 lift eco

Inhaltsverzeichnis