Top Up The Regeneration Salt; Replace Canister - Miele PTD 901 Originalbetriebsanleitung

8.4

Top up the regeneration salt

Note
Salt residues can have a negative effect on the wash result. It is best, therefore, to top up the regeneration salt before
starting the self-cleaning programme.
Caution
Damage to the water softener
Chemicals such as detergent or rinse aid or other salts such as table salt will inevitably damage the water softener.
Ø
Fill exclusively with regeneration salt or pure evaporated salt with a maximum grain size of 1-4 mm.
Caution
Danger of rust formation in the filling area as a result of salt residues
Ø
After filling the regeneration salt, start a washing programme or the self-cleaning programme in order to wash away
any salt residues that may be present.
Ø
Only fill with water when commissioning the water softener for the first time.
Ø
Top up the regeneration salt.
8.5

Replace canister

Ø
Wear protective clothing, protective gloves and protective goggles.
Ø
Pull the suction tube carefully out of the empty canister.
Ø
Check whether both vent holes (1) in the caps are open. Clean if required.
Ø
Place suction tube in the new canister.
Ø
Slide the cap slowly downwards until the canister opening is closed.
1
1
The dosing device must be vented if air has entered the dosing hose. This occurs if the canister is not replaced in time.
1
Operating instructions PTD 901
~ 1,5 l
~ 1,5 kg
2
Cleaning and maintenance
Item Name
1 Rinse aid dosing device
2 Detergent dosing device
Ø
Press button 1 or 2.
ð The button turns white.
ð The dosing device is being vented.
Ø
As soon as the button turns dark again, exit the menu.
| |
12020302; 2021-09
| |
8 English
95