Operation; Switching On The Warewasher; Checking For Completeness; Washing - Miele PTD 901 Betriebsanleitung

6

Operation

6.1

Switching on the warewasher

The warewasher is ready for operation as soon as the start button lights up white.
6.2

Checking for completeness

Note: Ensure that there is always enough detergent and rinse aid available to achieve an optimum wash result.
6.3

Washing

Caution
Risk of scalding from hot wash water
Ø
Do not open the hood during washing.
Ø
Before opening the hood, cancel the washing programme by pressing the start button and wait a few seconds.
– Do not wash without a wash rack.
– Do not wash electrical cooking appliances.
– Do not wash parts made of wood.
– Do not wash ashtrays or objects covered with wax.
– Only wash heat-resistant plastic parts and those resistant to alkalis.
Instructions for a good wash result
– Soak the cutlery until it is clean. Do not use any foaming pre-cleaners.
– Do not polish glasses, cutlery or dishes. Germs and bacteria can be found even in fresh multi-purpose cloths.
– Wash parts made of aluminium, e.g. pots, containers or trays, only with a suitable detergent to avoid black discolouration.
Operating instructions
| |
12020321/01; 2023-07
| |
Operation 6 English
2 s
69