Operation; General - probst SAZ-UNI Betriebsanleitung

Operation

6 Operation
6.1

General

Attach the device to the carrier (e.g. excavator) by means of the suspension eye using slinging
equipment (crane hook, slip, etc.) and move it to the desired position.
Move the device to the material to be grabbed (road gullies) using the handle.
In general, it must be ensured that the device (SAZ-UNI) is always positioned centrally (in the center) of
the load before it is lifted and transported (Figure 1)!!!
When positioning off-center, there is a risk of accident due to slipping of the gripping material (Fig. 2).
Fig. 1 (Top view)
Position of the suspension eye for moving/transporting the
device (SAZ-UNI)
Without gripped material.
Fig. 3
54000035
Fig 2 (Top view)
Position of the suspension eye for gripping/transporting
the device (SAZ-UNI)
With gripped load
Fig. 4
14 / 21 GB