probst SAZ-UNI Betriebsanleitung Seite 44

Operation
Move the device (SAZ-UNI) to the gripping material to
be transported.
Fig. 5
Place the device (SAZ-UNI) centrally (in the center)
on the gripped material (see Fig. 1).
To ensure safe gripping and transport of
the load, it is essential to ensure that the
device rests completely on the upper
edge of the load to be gripped!
Fig. 6
54000035
By carefully moving the crane hook on the carrier (e.g.
excavator), bring the suspension eye into the so-called
gripping position (see Fig. 4, 6 and 7) (alternatively, this
can also be done by hand).
Fig. 7
15 / 21 GB