Operation; Safelock Safety Interlock; Laying Pipes On A Slope - probst RG-SAFELOCK Betriebsanleitung

Operation

6 Operation
6.1

SAFELOCK safety interlock

The suspension eye runs in a scenery with two
positions:
•
Position A: "Gripping"- Locked gripping of the load
•
Position B: "Release"- Release the locking device
and empty stroke (device without load), see red
marking
•
The device can therefore be operated by one
person
Danger from falling load!
If the suspension eye is in position B "idle stroke", it is
forbidden to move pipes! There is no function of the
SAFELOCK safety interlock and the load could fall
down!
Always move the pipes only when the suspension eye
is in position A "Grip"!
6.1.1

Laying pipes on a slope

When laying concrete pipes on a slope, the red side
of the pipe mustalways point downhill.
If the side marked in red points uphill, the
subsequent opening of the device is only very
difficult or possibly not possible at all when setting
down the material to be picked up!
5450.0006
Optimum pulling direction for opening the device:
V1
15 / 22
GB