General; Authorized Use - probst SAZ-UNI Betriebsanleitung

General

3 General
3.1

Authorized use

The device (SAZ-UNI) is exclusively suitable for gripping and moving road gullies (such as bottom and
intermediate parts) according to DIN 4052 with an outer diameter of 550 mm, and especially for socket
parts with an outer diameter of 625 mm and a maximum load capacity of 165 kg.
The unit is connected to the carrier (e.g. excavator) via the suspension eye using lifting gear (crane hook,
slip, etc.).
It must be ensured that the load capacity and the gripping range of the device are not exceeded
(see "Technical data").
•
The device is only designed for the use specified in this documentation.
•
Every other use is not authorized and is forbidden!
•
All relevant safety regulations, corresponding legal regulations, especially regulations of the
declaration of conformity, and additional local health and safety regulations must be observed.
Prior to every operation the user must ensure that:
•
The equipment is suited to the intended operation
•
the functioning and the working condition of the equipment is examined
•
the load is suitable to be handled.
Any doubts about instructions should be raised with the manufacturer prior to use.
ATTENTION: The use of this device is only permitted in proximity to the ground (→ chapter
"Safety at work" and "Explanation of basic concepts").
NOT ALLOWED ACTIVITIES:
Unauthorized alterations of the device and the use of any self-made additional equipment could cause
danger and are therefore forbidden!
Never exceed the carrying capacity/working load limit (WLL) and the nominal width/nominal size
of the device.
All unauthorized transportations with the device are not allowed:
•
Transportation of people and animals.
•
Transportation of other loads and materials than described in this manual.
•
Never suspend any goods with ropes, chains or similar at the device.
54000035 8 / 21 GB