Print Menu - OHAUS Courier 5000 Bedienungsanleitung

Courier 5000
Alternate Print command
Set the alternate command character for Print.
Settings of A (a) to Z (z) are available. The default setting is P.
Alternate Tare command
Set the alternate command character for Tare.
Settings of A(a) to Z(z) are available. The default setting is T.
Alternate Zero command
Set the alternate command character for Zero.
Settings of A (a) to Z (z) are available. The default setting is Z.
NOTE: Setting of P, T and Z are not available in more than one command options.
End
Advance to the next menu or return to the top of the current menu.
4.7

Print Menu

You can set the parameters with the Print menu. Default settings are in bold.
Menu Sub-Menu
Reset
Assignment
Print
P.r.N.t)
(
Mode
Stable Weight
Only [Demand]
Content
Layout
End
NOTE: / indicates that it is not applicable in the table above.
Reset
Reset the Print menu to factory defaults.
NO = do not reset
YES = reset
Assignment
Demand
If Demand is selected, the sub-menu Stable Only will display.
Auto On Stable= printing occurs each time the stability criteria are met.
If Auto On Stable is selected, the sub-menu Mode will display.
Accept
If Accept is selected and the weighing mode is Alert, values will be printed when the weight is accepted.
ACept
Interval
If Interval is selected, the sub-menu Time will display.
IntEr
Sub-Menu
(In segment)
reset
ASSIG
mMODE
Stabl
CONte
LAYOt
ENd
= printing occurs when Print key is pressed.
= printing occurs each time the display is within the Alert range and stability criteria is met.
= printing occurs at the defined time interval.
Options Options (In segment)
NO, yes
no, yes
DemMa
Demand
On.Sta
Auto On Stable
ACept
Accept
INter
Interval(seconds)
mMt.CO
MT-Continuous
OH.CON
OH-Continuous
UPS
UPS
Load, Load and
LOAD, LOA2E
Zero
OFF, On
Off, On
Result, Gross, Net,
resUl, GrOSS, Net,
Tare, Header,
tArE, HEAdE FOOtE,
Footer, Mode, Unit,
mMOdE, UNIt, INFO
Info
FrmMt, FEEd
Format, Feed
/
/
EN-19