Selecting The Print Content - OHAUS Courier 5000 Bedienungsanleitung

Courier 5000
Mode
Set the status.
= disabled
OFF
On = the Mode is printed
Unit
Set the status.
OFF = disabled
= the Unit is printed
On
Info
Set the status.
= disabled
OFF
On = the reference information is printed (ex. Alert limits)
Layout
Set the format of the data output to a printer or computer.
Format
Set the printing format.
mM = a multi-line (single column style) printout is generated.
S = a single line printout is generated.
Feed
Set the paper feed.
LINE = move a paper up one line after printing.
4LF = move a paper up four lines after printing.
FormM = a form feed is appended to the printout.
End Print
Move to the next menu or return to the top of the current menu.

4.7.1 Selecting the Print Content

The terminal can be connected to a PC via the USB cable and run the OHAUS ScaleMate software on the
PC.
In ScaleMate, there is a window to select the print content (Result, Gross, Net, Tare, Header, Footer,
Mode, Unit and Info). After selecting the desired content, please click the Write button to transmit the
data to the scale. (For example: If you select the Net and Gross, then click the Write button in the
ScaleMate software. The Result and Gross are enabled, and other options are disabled in the scale.)
Therefore, you can see the net weight and the gross weight from the output of the printer.
NOTE: You can contact an authorized OHAUS dealer and learn more about the software's other functions.
EN-21