Operation; Menu Structure; Using The Balance; Maintenance - OHAUS Scout SKX-Serie Bedienungsanleitung

3. OPERATION

3.1 Overview of Display, Home Screen
Button
Functions:
Button
Short Press Zero/On
Turns the balance on;
If balance is On, sets
Zero
Off
Long Press
Turns the balance Off
Short Press Yes
(Menu Accepts the current
Function) setting

3.2 Menu Structure

Cal Setup
Span Reset
Lin Filter
AZT
StableRange
Backlight
Auto Tare
Auto Off
End End

3.3 Using the Balance

Note: Before using any application, be sure the balance has been leveled and calibrated.
Weighing Application
1. If required, place an empty container on the pan and press Tare.
2. Add sample to the pan or container. The display shows the weight of the sample.

4. MAINTENANCE

4.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.
All manuals and user guides at all-guides.com
Print
Initiates print Initiates an
application mode
Units
Changes the Changes the
weighing unit application mode
No
Advances to the Moves to previous
next menu or menu item
setting
Mode Unit
Reset Reset
Weighing g
Density kg
Mole Weighing oz
lb:oz
lb
N
End End
Function Tare
Tare
Mode Menu
Enters the User
menu
Back Exit
Exits the User menu
End
EN-3