Setup Menu; Readout Menu - OHAUS Courier 5000 Bedienungsanleitung

EN-16
4.3

Setup Menu

You can set the scale parameters with the menu
Menu Sub-Menu
Reset
Setup
Power On Unit
S.E.t.
End
NOTE: / indicates that it is not applicable in the table above.
Reset
Reset the Setup menu to factory defaults.
NO
= do not reset
yes
= reset
Power On Unit
Set the unit in the weighing mode after rebooting.
AUtO
= After rebooting, the weighing unit will be the previously-selected unit.
g, kg, lb, oz, lb:oz = After rebooting, the selected weighing unit in the menu will be used regardless of
previously selected unit.
NOTE: The unit will not appear unless they are set to on in the unit menu.
End
The display exits the current menu and moves to the next menu.
4.4

Readout Menu

You can set the user preferences with the readout menu. Default settings are in bold.
Menu Sub-Menu
Reset
Stability
Zero Range
Filter Level
Auto Zero Track
Read Out
(r.E.A.d) Back Light
Auto Off
PWM.SAVE
Calibration Lock
End
NOTE: / indicates that it is not applicable in the table above.
Reset
Reset the readout menu to factory defaults.
NO
YES
= reset
Stability
Set the amount reading can vary before the stability symbol turns off.
.5d
1d
= 1 scale division
2d
= 2 scale divisions
5d
= 5 scale divisions
Zero
Set the percentage of scale capacity that can be zeroed.
Sub-Menu
(in segment)
reset
PwWr.U
ENd
Sub-Menu
(in segment)
reset
Stab
ZErO
FIlt
AZt
LIGHt
A-Off
PwWmM
Lock
ENd
= do not reset.
= 0.5 of a scale division
S.E.t
. Default settings are in bold.
Options
no, yes
Auto, g, kg, lb, oz, lb:oz
/
Options
no, yes
.5d, 1d, 2d, 5d
2%, 100%
Low, Medium, High
Off, 0.5d, 1d, 3d
Off, On, Auto
Off, 1min, 5min, 10min
ON, OFF
ON, OFF
/
Courier 5000
Options (in segment)
NO, yes
AUtO,
g, kg, lb, oz, lb:oz
/
Options ( in segment)
NO, yes
.5d, 1d, 2d, 5d
2, 100
LOwW, mMEd, HIGH
OFF, .5d, 1d, 3d
OFF, On, Auto
OFF, 1, 5, 10
On, OFF
On, OFF
/