Menu Settings - OHAUS Valor 4000W Serie Bedienungsanleitung

Valor™ 4000W Series

4. MENU SETTINGS

The User Menu allows the customizing of scale settings.
4.1 Menu Navigation
User Menu:
Menu: C.A.L
Span
Lin
Menu GEO
Items: End
Notes:
Some Units/Modes may not be available in all models.
When LEGAL FOR TRADE is set to ON (see section 4.9), the menu settings are
affected.
To Enter the Menu Mode
Press and hold Menu until [mMeNU] (Menu) is displayed. When released the first sub-
menu [C.a.l] (Cal) will be shown.
Press Yes to enter the displayed sub-menu or press No to advance to the next.
Selecting a sub-menu will display the first menu item. Press Yes to view the menu
item setting or press No to move to the next menu item. When viewing the setting,
press Yes to accept the setting, or press No to change the setting. When [End] is
displayed, press Yes to return to the sub-menu selections or No to return to the first
item in the current menu. Bold indicates factory default setting.
Note: The Calibration / Menu Mode indicator is displayed when in the Menu Mode.
4.2 Cal Menu
Enter this menu to perform calibrations.

Span [SpaN]
Initiates a span calibration procedure (zero and span).

Lin [LIN]
(yes, no)
Initiates a linearity calibration procedure (zero, mid-point and span).

GEO [GEO]
Geographical Adjustment Factor (GEO) is used to adjust the calibration
based on the current location. Settings from 0 to 31 are available with 12
being the default. Refer to table 4-1 to determine the GEO factor that
corresponds to your location.

End Cal [End]
Advance to the next menu or return to the top of the current menu.
S.E.t.U.P r.E.A.d
Reset Reset
Pwr.Un Stable
A.Tare Filter
Ir.Func AZT
Ir.Adj Light
Accum Sleep
End A.Off
End
(yes, no)
M.O.d.E U.n.i.t
Reset kg
Percnt g
Check oz
End lb
lb:oz
End
EN-9
L.O.C.k E.n.d
Reset
L.Cal
L.Setup
L.Read
L.Mode
L.Unit
End