Direct Wall Mounting; Leveling The Equipment - OHAUS Courier 5000 Bedienungsanleitung

Courier 5000 EN-7

2.3.4 Direct Wall Mounting

The terminal may be mounted directly to a wall or table using two screws (not included).
Select appropriate size screws that fit into the holes at the
bottom of the terminal housing. See Figure A. When
mounting to a wall without a solid backing, use appropriate
anchoring hardware.
112mm/4.4''
Figure A. Direct Wall Mount Arrangement
2.4

Leveling the Equipment

Place the scale on a firm and stable flat surface and avoid excessive airflow, vibration, heat sources, or rapid
temperature changes. Afterwards, rotate the scale feet for leveling (only for L and X models).