Ohaus Commands - OHAUS Courier 5000 Bedienungsanleitung

EN-34

10.2 OHAUS Commands

Commands listed in the following table will be acknowledged by the scale.
The scale will return "ES" for invalid commands.
Please add \r\n after each command to send（\r refers to \return; \n refers to \newline)
Command Function
P Print displayed weight (stable or unstable).
IP Print displayed weight immediately (stable or unstable).
CP Print weight continuously.
SP Print weight when stable.
Z Same as pressing Zero Key.
T Same as pressing Tare Key.
TA Set/inquiry of tare weight value.
•
•
Set/inquiry current display unit.
•
U
•
Set/inquiry current application mode.
•
M
•
Enter print output string, x = string number (1-5), "text" = string text up to 40 alphanumeric
H x "text"
characters.
Enter Footer String content, x = string number (1-2), "text" = string text up to 40
F x "text"
alphanumeric characters.
NOTE:
The italic content in each command needs to be filled with actual value.
•
Space in each command is needed. Please pay attention to it when input commands.
•
Table 10-5 Unit ID
Unit ID Unit Name
0 Gram
1 Kilogram
7 Pound
8 Ounce
20 Pound:Ounces
OHAUS Commands
Set: TA tare value unit
Example: TA 5 kg
Inquiry: TA
Set: U unit ID
Example: U 1
Please check the following table 10-5 for the ID of each unit.
Inquiry: U
Set: M application ID
Example: M 0
Please check the following table 10-6 for the ID of each application.
Inquiry: M
Abbreviation
g
kg
lb
oz
lb:oz
Table 10-6 Application ID
Application ID Unit Name
0 Weighing
4 Dynamic/Display Hold
6 Totalization
18 Weight Alert
Courier 5000