Dräger X-am 5600 Gebrauchsanweisung Seite 30

en Tests and Approvals
Areas subject to explosion hazards, classified by zones
The instrument is intended for the use in explosion-hazard areas of Zone 0,
Zone 1 or Zone 2 or in mines at risk due to fire damp. It is intended for use within
a temperature range of –20 °C to +50 °C, and for areas in which gases of
explosion groups IIA, IIB or IIC and temperature class T3 or T4 (depending on
the batteries and rechargeable battery) may be present. If used in mines, the
instrument is only to be used in areas known to have a low risk of mechanical
impact.
Areas subject to explosion hazards, classified by divisions.
The instrument is intended for use in explosion-hazard areas according to
Class I & II, Div. 1 or Div. 2 within a temperature range of –20 °C to +50 °C, and
for areas where gases or dusts of groups A, B, C, D, E, F, G and temperature
class T3 or T4 may be present (depending on the rechargeable battery and
batteries).
Safety instructions
To reduce the risk of ignition of a flammable or explosive atmosphere, strictly
adhere to the following caution and warning statements:
!
WARNING
Increased hydrogen concentrations within the measuring range of the Dräger
Sensor XXS H
2
Dräger sensors XXS H2S, and XXS CO, XXS H
well as due to the negative effect on the Dräger Sensor XXS O
! WARNING
Only use power packs ABT 0100 (83 22 237), HBT 0000 (83 18 704) or
HBT 0100 (83 22 244). See marking on power pack for approved batteries and
related temperature class.
! WARNING
Do not change batteries in hazardous locations.
! WARNING
To reduce the danger of explosion, do not mix new batteries with old batteries
and do not mix batteries made by different manufacturers.
30
HC may result in false alarms due to the additive effect on the
S (LC) and XXS CO (LC) as
2
.
2