krispol STARCUS F50 Montageanleitung Seite 63

SETTINGS OF FUNCTION PARAMETERS IN MENU
3. —
MENU 3
3. -
Adjustments of the
SOFT-STOP function
Adjustments of the SOFT-STOP function
3.-
3. 1
Note:
Press and hold the SET button for about 6 se-
conds until the display shows 0.-; then release
the button
- use the + button to select 3.; then briefly press
the SET button to select this parameter
3. 1
- appears on the display;
number 1 (default) is blinking
Use the +/- buttons to select a parameter
withing the range of
by pressing the SET button.
This function is responsible for the braking
speed of the door stopped by the user.
The default setting is
3.0
disables the SOFT STOP function.
3.1 The door speed will be reduced to 30% in
0.75 seconds before stopping
3.2 The door speed will be reduced to 40% in
0.75 seconds before stopping
3.3 The door speed will be reduced to 50% in
0.75 seconds before stopping
3.4 The door speed will be reduced to 60% in
0.75 seconds before it stops
3.0 3.4
to and confirm
3. 1.
63