Sentiotec CV 31 Montage- Und Gebrauchsanweisung Seite 60

Instructions for use for the user
6. Viewing/changing settings
During sauna operation, you can view or change all temperature, heating dura-
tion or fan settings.
a) Viewing/changing target values
● Press the PROG/OK
set value flashes.
● Using the UP/DOWN buttons
● Press the PROG/OK
b) Manually turning the program off
● During heating:
Press the START/STOP
– Sauna heating turns off.
– The indicator light HEATING
– The control unit is in standby mode
c) Automatic shutdown
● After the set heating duration expires, the sauna control unit automatically
switches heating off.
– A tone sounds continuously for 10 seconds.
– The indicator light HEATING
– The control unit is in standby mode.
WORLD OF WELLNESS
button: In the display
8
, enter the desired value or view the set value:
7
button: The new setting has been made.
8
:
6
3
3
the corresponding current
5
goes out.
.
goes out.
p. 26/34