Manual Operation - Quick Start - Sentiotec Cv 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user
8.6. Manual operation – quick start
1. Switching on the sauna control unit
Press ON/OFF switch
● The indicator lights
● In the display
5
2. Entering the heating duration (00:00–6:00)
● Press the UP/DOWN buttons
In the display
5
or the remaining heating time.
● Press the PROG/OK
In the display
5
or the last set value.
● Using the UP/DOWN buttons
In the display
5
● Press the PROG/OK
In the display
5
or the newly set value during heating operation.
The heating duration has been set.
WORLD OF WELLNESS
.
1
– go on for approximately 5 seconds.
9 c
the current time appears, (e.g.16:30): 16:30
until the indicator light TIME
7
appears (in standby): STOP
button:
8
flashes: 06:00
, set the desired value, e.g. [02:30]:
7
flashes: 02:30
button:
8
appears (in standby): STOP
p. 21/34
goes on:
b
EN