Selecting Menu Items - Sentiotec Cv 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user
3. Temperature = indicator light TEMP
the temperature of 10–110 °C in sauna mode
4. Fan speed = indicator light VENT
fan speed of 0–100%, e.g. [50%]
The settings can be changed when using sauna operation. Sauna operation is
automatically stopped after a specified heating duration.
Note: What is the target value or the actual value?
Target value = is the value that you set and would like to have.
e.g. 90 °C
Actual = is the current value in the cabin.
e.g. 85 °C

8.4. Selecting menu items

Using the Up/Down
menu items.
If you have selected a menu function, press the PROG button
now starts to flash. When flashing, you can use the UP/DOWN
change the value. Once you have set the desired value, press the PROG/OK
button again. The value is applied and the display
8
ing the UP/DOWN
value to start to change rapidly.
Using the START/STOP button
again later.
Tip rapid change for input values!
After holding the UP/DOWN buttons
the input values start to change rapidly.
WORLD OF WELLNESS
button, you can move up and down through the various
7
buttons down when the display is flashing will cause the
7
, you can start direct operation and stop it
6
:
a
:
9
stops flashing. Hold-
5
for approximately 5 seconds,
7
p. 19/34
. The display
8 5
buttons to
7
EN