Changing Fuses; Messages In The Display - Sentiotec Cv 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user

11.3. Changing fuses

Note Fig. 3 in the figures chapter.
WARNING!
Electric shock
Before opening the housing cover, disconnect all poles of the sauna
control unit and secure against reconnection.
1. Remove housing cover
unit" on page 9.
2. Carefully pull control panel
3. Replace fuse for the interior lighting (microfuse 5 x 20 T2.0 A/ 250 V)
or fuse for fan (sub-miniature fuse TR 5 – T 1.0 A/ 250V)
electronics of the device
4. Insert tabs
2
carefully press onto the housing lower part
5. Place the housing cover
and press until it clicks audibly. Check the fit of the control unit.

11.4. Messages in the display

1. LL in the display
The following appears in display
Interior temperature is below 10 °C.
WORLD OF WELLNESS
according to "4.1. Installing the sauna control
5
from the housing lower part
1
(microfuse 5 x20 T630 mA/ 250 V) A (Fig. 3).
a
of the operating unit
onto the housing lower part
5
into the two lateral holders
1
to the stop position.
6
: LL
5
p. 30/34
.
6
or fuse for the
7,
3
, swivel downward
6
,
9
and