Sentiotec CV 31 Montage- Und Gebrauchsanweisung Seite 67

Installation instructions, only for experts
Thermal safety:
● Heater sensor with excess temperature fuse. (Shutdown temperature 139 °C)
● Automatic heat duration limit after max. 6 hours (for private systems).
● Two-sensor system with temperature control over the bench.
Connected cables:
Power supply cable:
Heater supply cable (temperature-resistant up to 150 °C):
Sensor wires (temperature-resistant up to 150 °C):
Light wire:
Fan wire:
Auxiliary power units:
S2-18:
S2-30:
WORLD OF WELLNESS
Increase of the switched power of 10.5 kW to
18 kW total power;
Increase of the switched power
from 10.5 kW to 30 kW total power.
p. 33/34
min. 5 x 2.5 mm²
min. 2.5 mm²
min. 0.5 mm²
min. 1.5 mm²
min. 1.5 mm²
EN