Automatic Mode - Sentiotec Cv 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user

8.7. Automatic mode

1. Switching on the sauna control unit
Press ON/OFF switch
● The indicator lights
● In the display
5
2. Selecting the start of heating [00:00–23:59]
WARNING
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the
sauna heater before you activate automatic mode.
● Press the UP/DOWN buttons
● The following appears in display
● Press the PROG/OK
In the display
5
Using the UP/DOWN buttons
value is entered, e.g. [18:00]:
In the display
5
Press the PROG/OK
The following appears in display
The indicator light PROGRAM
The automatic start of heating has been set.
WORLD OF WELLNESS
.
1
– go on for approximately 5 seconds.
9 c
the current time appears, (e.g.16:30): 16:30
until the indicator light START goes on:
7
5
button:
8
flashes: OFF or the last set value.
, the desired
7
flashes: 18:00
button:
8
5
goes on.
4
: OFF or the last set value.
: 18:00
p. 23/34
EN