Sentiotec CV 31 Montage- Und Gebrauchsanweisung Seite 59

Instructions for use for the user
4. Entering the temperature (10–110 °C)
● Press the UP/DOWN buttons
In the display
e.g. [22 °C]: 22°
● Press the PROG/OK
In the display
5
● Using the UP/DOWN buttons
In the display
5
● Press the PROG/OK
In the display
e.g. [22 °C]: 22°
The temperature has been set.
5. Setting the fan [0–100% = P]
0 = off / 100 = max.
● Press the UP/DOWN buttons
The following appears in display
● Press the PROG/OK
or the last set value.
● Using the UP/DOWN buttons
In the display
5
● Press the PROG/OK
In the display
5
The fan speed has been set.
WORLD OF WELLNESS
7
the current sauna inside temperature appears,
5
button:
8
the last set temperature flashes, e.g. [90 °C]: 90°
7
flashes: 95°
button:
8
the current sauna inside temperature appears again,
5
7
5
button: In the display
8
7
flashes: 50 P
button:
8
the set fan output appears: 50 P
until the indicator light TEMP
, set the desired value, e.g. [95 °C]:
until the indicator light VENT
: 60 Por the last set value.
flashes: 60 P
5
, set the desired value, e.g. [50%]:
p. 25/34
goes on:
a
EN
goes on:
9