Troubleshooting; Interior Lighting Does Not Work; Changing The Clock Battery - Sentiotec Cv 31 Montage- Und Gebrauchsanweisung

Instructions for use for the user

11. Troubleshooting

11.1. Interior lighting does not work

● Turn off switch
● Turn off main fuses of the control unit in the fuse box.
● Replace light bulb.
● Turn on main fuses and press switch

11.2. Changing the clock battery

Note Fig. 3 in the figures chapter.
WARNING!
Electric shock
Before opening the housing cover, disconnect all poles of the sauna
control unit and secure against reconnection.
1. Remove housing cover
unit" on page 9.
2. Carefully pull operating unit
3. Replace battery (type CR2032)
4. Insert tabs
2
carefully press onto the housing lower part
5. Place the housing cover onto the housing lower part
and press until it clicks audibly. Check the fit of the control unit.
WORLD OF WELLNESS
.
2
according to "4.1. Installing the sauna control
5
from the housing lower part
1
8
of the operating unit
.
2
for clock on upper board.
into the two lateral holders
1
to the stop position.
6
1
p. 29/34
.
6
and
3
, swivel downward
EN