Sentiotec CV 31 Montage- Und Gebrauchsanweisung Seite 56

Instructions for use for the user
3. Starting the sauna control
● Press the START/STOP
In the display
Heating starts.
The indicator light HEATING
4. Viewing/changing settings
During sauna operation, you can view or change all temperature, heating
duration or fan settings.
Changing target values
1. Press the PROG/OK
current set value flashes.
2. Using the UP/DOWN buttons
3. Press the PROG/OK
5. Switching the sauna control off
a) Manual
Press the START/STOP
The indicator light HEATING
The control unit is in standby.
b) Automatic
After the set heating duration expires (see "Entering the heating duration
(00:00–6:00)"), the sauna control unit automatically switches heating off.
– A tone sounds continuously for 10 seconds.
– The indicator light HEATING
– The control unit is in standby mode.
WORLD OF WELLNESS
:
6
, the remaining heating period appears, e.g. 02:30
5
3
8
8
: Sauna heating turns off.
6
3
goes on.
button: In the display
, set the desired value.
7
button: The new setting has been made.
goes out.
goes out.
3
p. 22/34
the corresponding
5