Emerson Micro Motion 3000 MVD Serie Installations- Und Bedienungsanleitung Seite 324

Handterminal 375
Abb. H-7 Handterminal Menü Detailierte Einstellung Fortsetzung
5
Device information
1 Tag
2 Descriptor
3 Message
4 Date
5 Device id
6 Final assembly num
7 Sensor s/n
8 Sensor model
9 Output option board
Construction materials
Revision #s
Real-time clock
8
Display setup
1 Enable/disable
2 Display variables
3 Display precision
1 Update period
1
2 Display language
1 Screen 1, Line 1
2 Screen 1, Line 2
2
...
Screen 5, Line 4
1 Var code varx
2 Precision varx
3
...
312
On-Line Menu >
4 Detailed Setup
6
Config discrete event
1 Discrete event 1
2 Discrete event 2
3 Discrete event 3
4 Discrete event 4
5 Discrete event 5
1 Discrete event var
2 Discrete event type
3 Setpoint A
4 Setpoint B
9
Setup simulation mode
1 Simulation mode enable/disable
2 Simulate mass flow
3 Simulate temperature
4 Simulate density
5 Mass flow simulation mode (read-only)
6 Mass flow fixed value (read-only)
7 Mass flow minimum amplitude (read-only)
8 Mass flow maximum amplitude (read-only)
9 Mass flow period of waveform (read-only)
Temperature simulation mode (read-only)
Temperature fixed value (read-only)
Temperature minimum amplitude (read-only)
Temperature maximum amplitude (read-only)
Temperature period of waveform (read-only)
Density simulation mode (read-only)
Density fixed value (read-only)
Density minimum amplitude (read-only)
Density maximum amplitude (read-only)
Density period of waveform (read-only)
Micro Motion
Config alarms
1 Write severity
2 Read severity (read-only)
3 Review severity
4 Acknowledge the selected alarm
5 Alarm history
6 Refresh alarm history
Modbus data
1 Read Modbus data value
2 Write Modbus data value
®
Serie 3000 MVD Auswerteelektronik und Steuereinheit
7