Philips PS6000 Benutzerhandbuch Seite 20

PS-Micro control desk LBB 6105/00
4.5 Handling Multiple Priority 1 and 2 Alarms
In the event of multiple
incoming alarms, the control
desk, handles the alarms on a
priority basis (1,2 or 3) or if
the alarms are assigned the
same status (e.g Priority 1)
the control desk handles the
alarms on a 'first-in-first-out'
(FIFO) procedure.
In the event of receiving
multiple alarms the control
desk automatically displays
the text 'NEXT'.
Press key <B5> to go to the
NEXT incoming alarm.
Handling the alarms is the
same as handling a single
incoming alarm (see 4.2
Handling priority 1 and 2
alarms).
4.6 Handling Priority 3 Alarms
The control desk responds to incoming priority 3 alarms by remaining in the STANDBY mode.
The display opposite shows
the control desk in
'STANDBY' mode with no
alarms present.
ALARM RECEIVED mode
MANUAL ALARM
MOB 01 reseted
G
R
MANUAL ALARM
MOB 01 reseted
G
R
NO-MOVE ALARM
MOB 12 reseted
G
R
STANDBY mode
MOB 01 MOB 02
G G
G
16
curr LOCATION 003
loc. reroute
G G
R
curr LOCATION 003
loc. reroute
G G
R
curr LOCATION 003
loc. reroute
G G
R
28-02-00 16:30
MOB 03 MOB 04
G G
G
User Manual
NEXT
G
NEXT
G
MOB 05
G