Philips PS6000 Benutzerhandbuch Seite 10

PS-Micro control desk LBB 6105/00 User Manual
1.6 Extended functions of the PS-Micro control desk
Systems can range from a simple personal security system, to systems incorporating both
location detection and DP6000 radio paging facilities.
1.6.1 Location detection
PS-mobiles type LBB 6031, LBB 6033 and LBB 6035 include a location detection module for use
where inductive location transmitters type LBB 6070 are installed.The location transmitters
transmit a location address (programmable) linked to the name of a location within your
organisation.This location address can be received by the PS-mobiles when passing location
transmitters.The location address information is then stored and sent during an 'alarm-call' or
'check-in' call to the control desk, giving the operator the location of the PS-mobile holder. The
last two locations visited, current and previous are available.This feature is ideally suited for
directing 'rescue' teams to the location of the PS-mobile holder.
NOTE: Check with your system installer if location transmitters are installed.
1.6.2 DP6000 Paging facility
The functionality of the control desk can be extended with the addition of a Philips DP6000
paging system.The paging system includes paging receivers and a central paging transmitter.
During 'unmanned' operation an alarm can be automatically re-routed including its alarm
information to an assigned 'Operator's paging receiver. During 'manned' operation an alarm can
be 're-routed' by the control desk operator to assigned 'Colleague(s)' paging receivers acting as a
rescue back-up team. (See 5 ALARM RE-ROUTING).
6