Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
Manually switching between channels is still possible, but after 10 seconds the desk switches back
to the group of channels which includes the alarm status. If more channels in different groups
have an alarm status the desk switches automatically between these groups. For channel
information on each Mobile (see 3.2. Mobile/Channel Information).
Table 3.1 Status of Channel LEDs in STAND-BY mode
Desk Status
Mobile in use, NO alarms
Mobile in use PRIORITY 3 alarm
Mobile in storage rack
Mobile de-activated
Table 3.2 Mobile status
Mobile status
PRESENT
WAIT FOR SCAN
ABSENT
ALARM
GS TEST
LOW BATTERY
PS-Micro control desk LBB 6105/00
Channel LED (L1- L5)
GREEN (steady)
RED (flashing)
GREEN
OFF
Description
The PS-Mobile has reported itself 'PRESENT' to the system
and is in operational use.
The desk is waiting for a 'check-in' call from the
relevant PS-Mobile.The 'check-in' time is defined by your
system installer. If the desk does NOT receive a 'check-
in' scan call within this time-frame' an alarm procedure is
raised (see 4. ALARM HANDLING PROCEDURES).
The PS-mobile has been placed in to its
charging/storage rack
The PS-mobile is in an alarm condition
(See 4. ALARM HANDLING PROCEDURES)
The PS-mobile is performing a GS Test procedure.
(See 9. GS HANDLING PROCEDURES).
The PS-mobile is in 'LOW BATTERY' state.
9
LC-display
Mobile ID
Mobile ID
Mobile ID (flashing)
Blank
Eng
Werbung
Inhaltsverzeichnis
