Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
4.3 Acknowledging incoming Priority 1 and 2 Alarms
Acknowledge Alarm
To acknowledge an incoming
alarm and to mute the
audible bleep press the
<BM> key for less than 2
seconds.
Once the alarm has been
acknowledged, the operator
of the control desk is now
responsible for handling the
alarm and must take the
appropriate action.
If the alarm is not
acknowledged within a pre-
defined 'time-scale' (max 9
mins) the control desk will
automatically stop the
audible alarm, but remain in
the alarm state.
If a new location is received
from the mobile (if available)
the display will be updated
accordingly and an audible
bleep will be emitted to alert
the operator of its new
location (see 4.7 Audible
bleep patterns).
Alarm Handling
While in the 'ALARM
RECEIVED' mode press the
<B1> key to display
information on how to
handle the alarm.
Press <B5> to return to the
'ALARM-RECEIVED' mode.
NOTE: The inform-
ation on how to
handle the alarm is
preprogrammed by
your system installer.
PS-Micro control desk LBB 6105/00
ALARM RECEIVED Mode
MANUAL ALARM
MOB 01
G
R
Press <2 seconds to acknowledge
incoming alarm
ALARM RECEIVED Mode
MANUAL ALARM
MOB 01
G
R
ALARM INFORMATION display
MOB 01
ALARM HANDLING INFORMATION
R
13
curr
LOCATION 003
loc.
reroute
G
G
R
curr
LOCATION 003
loc.
reroute
G
G
R
R
Eng
RETURN
G
Werbung
Inhaltsverzeichnis
