Inhaltsverzeichnis
Werbung
Table of contents:
1.
Introduction ........................................................................................................ 21
2.
Device description ............................................................................................. 21
3.
Scope of delivery ............................................................................................... 21
4.
Proper use ......................................................................................................... 22
5.
Safety information .............................................................................................. 22
6.
Technical data .................................................................................................... 24
7.
Unpacking .......................................................................................................... 24
8.
Assembly / Before commissioning .................................................................... 25
9.
Start up .............................................................................................................. 26
10.
Cleaning ............................................................................................................. 27
11.
Transport ............................................................................................................ 27
12.
Storage .............................................................................................................. 27
13.
Maintenance ...................................................................................................... 27
14.
Disposal and recycling ....................................................................................... 28
15.
Troubleshooting ................................................................................................. 30
20 | GB
www.scheppach.com
Page:
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description
1.
Push bar
2.
Fuel gauge
3.
Tank cover
4.
Transport hook
5.
Maintenance cover
6.
Casters
7.
Ignition lock
8.
Choke
9.
Oil pressure warning light
10. Voltmeter
11. Selector switch 230V~ / 400V~
12. Safety trigger 400V~
13. 400V socket (1x)
14. Earth connections
15. 12V DC connection
16. 12V DC safety trigger
17. 230V socket (2x)
18. Safety trigger 230V~
19. Battery attachment set
20. Ring spanner
21. Battery
22. Oil dipstick
23. Air filter
24. Brake lever
25. Brake
3. Scope of delivery
• Generator
• Operating manual
• Ring spanner
• Battery attachment set
• Battery 12V / 30AH
www.scheppach.com
GB | 21
Werbung
Inhaltsverzeichnis
Fehlerbehebung
