Introduction; Device Description (Fig. 1 - 15); Scope Of Delivery; Proper Use - Scheppach DSE5500 Original Bedienungsanleitung

2. Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
we wish you much pleasure and success in working
with your new device.
Note:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for dam-
age to the device or caused by the device arising from:
• Improper handling
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified.
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

3. Device description (Fig. 1 - 15)

1. Sight glass
2. Fuel filler cap
3. Lifting eye
4. Front transport handle
5. Maintenance door
6. Locking mechanism
7. Wheels
8. Rear transport handle
9. Air filter cover
10. Ignition lock
11. Oil warning indicator
12. Voltage indicator
13. Circuit breaker 230 V / 400 V
14. Reset button
15. 12 V DC connections
16. Earthing screw
17. 400 V~ - socket
18. 230 V~ - socket (2x)
19. -
20. Oil dipstick
21. Oil drain screw
22. Oil filter
23. Air filter
24. Coarse filter
25. Air filter outlet
26. Diesel filter
27. Mechanical ON/OFF switch
28. Fuel filter insert

4. Scope of delivery

• Power generator
• Ignition key (2x) (A)
• Open-ended spanner, 10 mm + 12 mm (B)
• Battery (C)
• 2x locking nuts M6 (D)
• 2x M6 x 16 screws (E)
• Operating manual

5. Proper use

The power generator is suitable for devices that are
intended to operate on a 230 V / 400 V AC or 12 V DC
voltage source.
With household devices and electronic devices, please
check the suitability according to the respective manu-
facturer's specifications.
www.scheppach.com GB | 29