Walk Assist - dutch id PHANTOM Bedienungsanleitung

You can adjust the assist level either while stationary or while cycling using the control unit.
Ҍ Press to increase the assist level.
Ҍ Press to decrease the assist level.
The current assist level is indicated in the status bar at the top of the display of the on-board
computer.
In addition, each assistance level has its own colour. The assistance level LED and the accent
colour of the display show the colour of the active level.
If you remove the on-board computer from the e-bike, it will remember the last selected level.
4

6.3. Walk assist

Figure 33 - Activate walk assist.
The e-bike has a walk assist feature to ease walking uphill with the e-bike.
The speed of the walk assist depends on the selected assist level. The maximum walking speed is
6 km/h.
The walk assist feature is not available in the "OFF" mode.
4
1. Hold down on the control unit to activate the walk assist feature. As soon as you release
the button, the walk assist feature will immediately turn off.
The walk assist feature also turns off automatically if:
Ҍ the wheels of the e-bike are blocked by braking or if they hit an obstacle.
Ҍ the speed is higher than 6 km/h, for example if you run or walk downhill.
EN
87