Turning On The E-Bike; Turning The Lighting On/Off - dutch id PHANTOM Bedienungsanleitung

5.5. Turning on the e-bike

1. Charge the battery k sufficiently for the planned journey, see chapter 4.5.
2. Place the battery k in the battery holder, see chapter 4.3.
3. Place the on-board computer
4. Press the on/off button on the on-board computer .
Figure 28 - Press the on/off button on the on-board computer.
CAUTION
6
Do not use sharp or pointed objects to press the on/off button.
The e-bike is now turned on.
Press the on/off switch again to turn the e-bike off again.
The e-bike will automatically turn off to save energy after 10 minutes of inactivity.
4
5.6. Turning the lighting on/off
Figure 29 - Keep the '+' button depressed to switch the bicycle lighting on or off.
Keep the ' ' button depressed to switch the bicycle lighting on or off.
Once you have turned on the lighting, this will be indicated in the status bar at the top of the
4
display of the on-board computer.
The rear light
4
i
when you brake hard.
84
in the holder (see chapter 4.6).
4
is fitted with a brake indicator that allows the rear light to burn more brightly